Sapphire Epidural Infusion Pump
Dedicated, color-coded, pain management system for epidural infusions
- Quick access to delivery history during and after infusion
- Configurable delivery limits, per volume or number of doses
- Supports up to 10 different Preset Programs per mode
- Optional automatic lock requiring password to start infusion or update infusion parameter
- SKU
- 17000-031-0035
- Marca
- Sapphire
- Categorías
- Compartir
Accurate infusion care, simple, fast, effective, and future-ready
The Sapphire Epidural Infusion Pump is a dedicated, color-coded pain management system for epidural infusions. Specifically designed to accommodate the needs and limitations of Epidural infusion Sapphire Epidural provides the complete solution for Epidural delivery.
Optimized Patient Outcomes, for the Long-Run
Sapphire Epidural infusion pumps are small in size, yet big in performance. Offering tailored solutions for a variety of infusion needs and to enhance patient care. Sapphire’s Epidural quick setup and intuitive workflows can help you improve response time and leave you with more time to care for your patient.
The Sapphire Epidural Infusion Pump supports different modes of operation
CEI (Continuous Epidural Infusion): Delivers Epidural Infusion at a constant rate with the option to administer a clinician bolus
PCEA (Patient Controlled Epidural Analgesia): Delivers epidural boluses, either alone or in addition to a basal rate, a clinician bolus can also be administered.
Intermittent Epidural: Delivers epidural infusions at intermittent programmed intervals.
PIEB (Programmed Intermittent Epidural Bolus): Intermittent programmed intervals with optional PCEA, to allow patient and clinician Boluses throughout the intermittent infusion.
Quick access to delivery history during and after infusion.
Configurable delivery limits, per volume or number of doses.
Supports up to 10 different Preset Programs per mode (PCEA/ Epidural Intermittent).
Optional automatic lock requiring password to start infusion or update infusion parameter.
- Dimensions
- 143 mm X 96 mm X 49 mm (5.63 x 3.78 x 1.93 in.) (H x W x D)
- Weight (excluding battery)
- 418 g (14.7 oz.)
- Infusion Device
- Volumetric, Peristaltic
- Pumping Mechanism
- Single channel volumetric, with an integral pressure sensor
- Infusion delivery modes
- CEI, PCEA, Epidural Intermittent & PIEB
- KVO Rate
- Up to 20 mL/h in increments of 0.1 mL/h
- Accuracy
- ±2.5% under normal conditions (per IEC60601-2-24 standard)
- Battery
- Rechargeable Li-Ion battery 7.4V, 1960 mA/h, 24 hrs @ 125 mL/h (with a fully charged battery and backlight Off) Recharge time: up to 6 hrs (when the pump is not in operation)
- Continuous Rate
- 0-25 mL/h in increments of 0.1 mL/h
- Configurable Bolus Rate
- 125/200 ml/h
- Volume (VTBI)
- 0.1 a 9999 ml in Increments of 0.1 ml
- External Power Supply
- 100-240 V, 50-60 Hz, 0.6 A
- Downstream occlusion
- Up to 1.2 Bar (17.4 PSI or 900 mmHg)
- Air in Line Sensor
- The Sensor detects single and accumulated bubbles of selectable sizes varying from 0.02 mL - 0.5 mL
- Operating temperature
- +5° (41oF) to 40°C (104oF
- Water Ingress and Dust Protection
- IP24 according to IEC 60601-1-11
- Priming
- Manual or automatic priming (600 mL/h, or from the air in line alarm 900 mL/h)